XYZprinting Da Vinci 2.0

alaTest har samlat in och analyserat 7 tester för XYZprinting Da Vinci 2.0. Det genomsnittliga betyget av denna produkt är 3.2/5, att jämföra med genomsnittsbetyget 4.0/5 för produkter i samma kategori. Utskriftskvaliteten och prestandan uppskattas av många men konstruktionen uppskattas inte lika mycket. Åskterna går isär om designen och användarvänligheten .

prisvärdhet, prestanda, utskriftskvalitet

Tillförlitlighet, storlek, konstruktion

Användare ger produkten betyget 63/100 i genomsnitt.

Testanalys

(Baserad på 7 recensioner)

Användarrecensioner  

Betyg

  (29% av recensionerna)
Visa alla 5-stjärniga betyg   (29% av recensionerna)
Visa alla 4-stjärniga betyg   (Inga recensioner)
    (14% av recensionerna)
Visa alla 2-stjärniga betyg   (29% av recensionerna)
Visa alla 1-stjärniga betyg

Funktioner

användarvänlighet
  Visa positiva (50%)Visa negativa (50%)(Visa alla)
prisvärdhet
  Visa positiva (91%)Visa negativa (9%)(Visa alla)
tillförlitlighet
  Inga ännuVisa negativa (100%)(Visa alla)
storlek
  Inga ännuVisa negativa (100%)(Visa alla)
prestanda
  Visa positiva (100%)Inga ännu(Visa alla)
design
  Visa positiva (50%)Visa negativa (50%)(Visa alla)
utskriftskvalitet
  Visa positiva (100%)Inga ännu(Visa alla)
konstruktion
  Inga ännuVisa negativa (100%)(Visa alla)
visa alla

Visar 7 recensioner

Produkttester Användarrecensioner

Disclaimer:

Nedan är en lista med recensioner för denna och/eller liknande produkter. Om du tror att denna gruppering är fel kan du klicka här för att flagga.
Läs mer på vår FAQ sida.
Visar 1 - 7 av 7 Visa tester: på svenska | alla länder

Användarrecension (newegg.com)

Not bad for the price

 

Price is at the lower end for the type of printing quality you get ; Print quality is pretty good compared to others at the price range ; Easy to calibrate once you know what your doing ; Loading the filament is easy and pain free even for noobs If you...

Tray needs calibrating often because of metal warping with heat constantly changing and when removing part from the tray if it's stuck to the try it take a bit of force to remove even if you don't use the glue stick. Unless you use software that uses a...

Jul 2015
Läs hela testet

Användarrecension (newegg.com)

Waste of your time & money

 

Run, don't walk. Look further cause this anchor isn't worth it.

Price alone

keeps breaking down. Arrived inoperative. Needed new display board, Heater failures are recurring. Replaced two heaters already. Broken belt already. More down time than up. Absolutely NO help from XYZ. I'm converting mine to an Arduino controller to...

Apr 2015
Läs hela testet

Användarrecension (newegg.com)

Great buget printer

 

Like all 3D printers there's no such things as plug and play even though they might try to market them as so. Be prepared to spend the time to learn about and maintain the printer. Also when buying a 3D printer do your research on what they can and can...

It's a very good price for a dual extruder printer. The print quality is pretty good out box too. I like the cartridge system as well since it keeps things nice an tidy and keeps track of how much filament is left. The software actually slices pretty...

The calibration can be a pain since the heated bed rests on top of a plastic frame. It susceptible to expansion and contraction which leads to different calibration number each time. The metal contacts used to calibrate can also get dirty fairly easily...

Feb 2015
Läs hela testet

Användarrecension (newegg.com)

Good quality price product

 

Easy, works with Autodesk product, low cost, entry level printer

Need conversion of files and adjustments, its not all automatic like a standard printer. Require some doing to print

Feb 2015
Läs hela testet

Användarrecension (newegg.com)

Disappointed

 

If I had it to do over again I would have purchased the DaVinci 1.0, saved $150 and had a great deal more mods and work arounds availabe and a larger print bed. It's probably a cheap way to get started with 3D printing but don't expect very good results.

The plug&play aspect is a nice feature and the overall package is attractive. The unit seems to be well engineered for quick factory assembly

The proprietary filament cartridge is a limitation but there are work arounds available ; The two color option seemed like a neat feature but on most of the things I have tried there is a considerable of filament mixing since the extruder apparently...

Nov 2014
Läs hela testet

Användarrecension (newegg.com)

Great!!!!

 

If i had to buy another one and would go for the single extruder model just cuz i have not found any reason to use both extruders in one print!

Works great! For the price you cannot beat HAve used high dollar ones before and dont see why you wouldnt just go with the lower priced printer cuz they produce the same product

You have to calibrate it every once in a while but once it has been done once it gets really easy

Nov 2014
Läs hela testet

Användarrecension (newegg.com)

bad printer

 

none

defective printer. couldn't even print a built in test object

Okt 2014
Läs hela testet

Prisjämförelse för XYZprinting Da Vinci 2.0

Inga priser funna för denna produkt